Important Safeguards - Hamilton Beach 52400 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a
person responsible for their safety.
3. Close supervision is necessary when any appliance is used by
or near children. Children should be supervised to ensure that
they do not play with the appliance.
4. To protect against risk of electrical shock, do not put cord, plug,
base, or motor in water or other liquid.
5. Unplug cord from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or has been dropped or
damaged in any manner. Call our toll-free customer service
number for information on examination, repair, or electrical or
mechanical adjustment.
8. The use of attachments, including canning jars, not
recommended or sold by the appliance manufacturer may cause
a risk of injury to persons.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch hot
surfaces, including stove.
11. Keep hands and utensils out of blending jar while blending
to reduce the risk of severe personal injury and/or damage to
blender. A rubber spatula may be used but must be used only
when blender is not running.
2

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS!
12. Blades are sharp; handle carefully—especially when
assembling, disassembling, or cleaning inside blending jar.
13. Do not use a broken, chipped, or cracked blending jar.
14. Do not use broken, cracked, or loose cutting blade assembly.
15. To reduce the risk of injury, never place cutting blade assembly
on base without blending jar or grinding cup properly attached.
16. Always operate blender with lid in place.
17. Do not blend hot liquids in the travel jar or grinding cup.
18. When blending hot liquids in the 32-oz. blending jar, remove
center piece of two-piece cover. Hot liquids may push lid off jar
during blending. To prevent possible burns: Do not fill blending
jar beyond the 3-cup (710-ml) level. With the protection of an
oven mitt or thick towel, place one hand on top of lid. Keep
exposed skin away from lid. Start blending
at lowest speed.
19. Ensure collar on base of blending jar, travel jar, and grinding
cup are tight and secure. Injury can result if moving blades
accidentally become exposed.
20. If the jar should twist or rotate when the motor is switched ON
(I), switch OFF (O) immediately and tighten jar in collar
or on blender base.
21. Do not leave blender unattended while it is operating.
22. Before plugging cord into wall outlet, turn the control to OFF (O).
To disconnect cord, turn the control to OFF (O). Then remove
plug from wall outlet.
23. Do not use appliance for other than intended purpose.
24. 24. Do not place on or near a hot gas or electric burner or in a
heated oven.
Tabla de contenido
loading

Este manual también es adecuado para:

52401Stay or go 52400

Tabla de contenido