Control Box Mounting; Strain Relief - Chamberlain LiftMaster Professional CB24 Manual De Instrucciones

CONTROL BOX MOUNTING

1. Determine the spacing required for mounting and select the
proper holes to be used for mounting (Figure 1).
2. Knockout plastic from holes using screw driver.
Insert the strain reliefs (Figure 3).
3. Place box up against the mounting surface. Insert the screws
through the mounting holes in back and secure in place
(Figure 2).

STRAIN RELIEF

Figure 3
Figure 1
(1) Screw Spacing 101.6mm (4")
(2) Screw Spacing 152.4mm (6")
(3) Screw Spacing 63.5mm (2-1/2")
Figure 2
(1) Mounting Post
(2) E-Box
(3) Mounting Screws (4 pieces)
5
1
2
3
1
2
3