Conceptronic Grab’n’GO Guía De Instalación Rápida página 22

ENGLISH
5. Stand-alone Photobox Use
Turn on the Photobox with the Soft Touch Power Button. Press and hold the Power
Button for 3 seconds. The Photobox will turn on.
The display will indicate the flashing message "Insert Card" and the battery status.
To turn off the Photobox: Press and hold the POWER Button for 3 seconds. The
Photobox will turn off.
Note: If no action is detected by the Photobox after 30 seconds, the device will
automatically turn off to save battery life.
5.1 Copy a Memory Card to the Photobox
When the device is turned on, insert your Memory card in the corresponding slot of the
Photobox. The Photobox will indicate the inserted card (CF, SD, MMC, etc.) on the
bottom, the COPY command on the top, and the used space on the card in the middle of
the display.
22