How To Use; Swing Guard; Opening & Closing - Munchkin vibe MKSA0511-011 Guia De Instalacion

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

How To Install
<2.5"
(63.5
mm)
2. Ensure that the ends of the TurnKey Mounts™ are seated inside the wall cups.
DO NOT overextend the TurnKey Mounts™. If the Max
Opening Indicator begins to appear on the left and right
sides of the gate in order for the handle to latch into the
frame, you must remove the gate and add an extension
for a proper fi t.
3. Tighten the TurnKey Mounts™ until the
latch locks into the gate frame and
the gap closes between the gate latch
and the gate frame.
12
Measurement Markings
<2.5"
(63.5
mm)
3
1/16" (1.5 mm)

SWING GUARD

When using at top or bottom of stairs, always
be sure the swing guard on the opposite side of
the gate from the stairs is in the locked position
(down). This prevents opening the gate into the
stairway. In all other locations, be sure the swing
guard is in the locked position (down) on the
side of the gate that the child occupies.
OPENING & CLOSING
Press the button on top of the handle with your
thumb, then squeeze the trigger on the underside
of the handle to open the gate.
Swing the gate back to its closed position. The
gate will lock automatically. Always check that
the gate is securely locked on the top and bottom
latches. Never leave your child unattended.
CLEANING THE GATE
Use mild soap and wipe with a damp cloth. Be careful not to wash or wipe
the stickers on the base of the gate. Removing or damaging the stickers will
void the warranty. For LUNA, do not wipe damp cloth near light, battery
compartment, or motion sensor.

How To Use

13
Tabla de contenido
loading

Este manual también es adecuado para:

Luna mksa0537-011

Tabla de contenido