Insert Hose; Accessory Storage; Extension Wands - Craftsman CMXEVBE176120 Manual De Instrucciones

Insert Hose (Fig. G)
Insert the Hose Locking End of the Hose into the Vac Inlet
Port of the Vac. The Hose should snap into place.
To remove the Hose from the Vac, press the Release Button
in the Hose Assembly and pull the Hose out of the Vac Inlet
Port, as shown.
Fig. G
Release
Button
Locking End
of Hose

Accessory Storage

Accessory Tools Storage (Fig. H):
Your Wet/Dry Vac Accessories can be stored in the Tool
Caddy mounted on the Drum.
Fig. H
8
Hose Storage (Fig. I):
The Hose Assembly may be stored by wrapping it around
the unit and snapping it into the Recessed Sides.
!
!
Fig. I
Vac Inlet
Port
Extension Wands Storage (Fig. J):
The Extension Wands can be stored underneath the Vac by
sliding the Tapered End first through the allotted Holes on
the back of the Caddy. The Wand stop on the front of the
Vac will hold the Extension Wands in place.
Accessory
Storage
Fig. J
Tool Caddy
Extension Wand
Storage Holes (2)
CAUTION:
Do not operate vacuum while the hose is still wrapped
around the powerhead assembly in the storage
position.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings blocked;
keep free of dust, lint, hair or anything that may reduce
air flow.
Hose Storage Area
Extension
Wands (2)
Hose
Assembly