Flex FX3181 Manual Del Operador página 15

WARNING
careful when the tool is not in use or when
carrying it at your side.
SWITCH BUTTON
The tool can be turned "ON" with the switch
button, located at the side of the motor housing.
The switch button can be locked in the "ON"
position, a convenience for long grinding
operations.
To turn the tool "ON" without locking it:
Slide the switch button forward by applying
pressure ONLY at the REAR portion of the
button.
When pressure is released the switch button will
snap to the "OFF" position (Fig. 11-1).
To lock the switch "ON":
Slide the switch button forward, then press on
the FRONT portion of the button (Fig. 11-2).
To unlock the switch:
Simply press and release the REAR portion of
the button.
The switch is spring loaded and will snap back
automatically (Fig. 11-3).
WARNING
product damage due to a short circuit, never
immerse your tool, battery pack or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
OPERATION INSTRUCTIONS
Battery tools are always in
operating condition. Be
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Do not attempt to modify
this tool or create
Fig. 11-1
Fig. 11-2
Fig. 11-3
-15-
a
b
b
a