WEG CFW100 Referencia Rápida página 15

CALL NOW 800-985-6929
Param.
P295 Inv. Rated Current
P296 Line Rated Voltage
P297 Switching Frequency
P299 Start Braking Time
P300 Stop Braking Time
P301 Start Frequency
P302 DC Braking Voltage
P303 Skip Frequency 1
P304 Skip Frequency 2
P306 Skip Band
P308 Serial Address
P310 Communication Rate. Serial
P311 Serial Bytes Config.
P312 Serial Protocol
P313 Communic. Error Action
P314 Serial Watchdog
P316 Serial Interf. Status
P320 Flying Start/Ride-Through
P331 Voltage Ramp
P332 Dead time
P340 Auto-Reset Time
CALL NOW 800-985-6929
http://www.automatedpt.com
Quick Reference of Parameters, Alarms and Faults
Description
1.6 to 15.2 A
0 to 1 = Reserved
2 = 200 - 240 V
2.5 to 15.0 kHz
0.0 to 15.0 s
0.0 to 15.0 s
0.0 to 300.0 Hz
0.0 to 100.0 %
0.0 to 300.0 Hz
0.0 to 300.0 Hz
0.0 to 25.0 Hz
1 to 247
0 = 9600 bits/s
1 = 19200 bits/s
2 = 38400 bits/s
0 = 8 bits, no, 1
1 = 8 bits, even, 1
2 = 8 bits, odd, 1
3 = 8 bits, no, 2
4 = 8 bits, even, 2
5 = 8 bits, odd, 2
0 to 1 = Reserved
2 = Modbus RTU (RS-485)
0 = Inactive
1 = Ramp Stop
2 = General Disable
3 = Go to LOC
4 = LOC Keep Enab
5 = Cause Fault
0.0 to 999.9 s
0 = Inactive
1 = Active
2 = Watchdog Error
0 = Inactive
1 = Flying Start
2 = FS / RT
3 = Ride-Through
0.2 to 60.0 s
0.1 to 10.0 s
0 to 255 s
http://www.automatedpt.com
Adjustable Range
Email: [email protected]
Factory Setting Prop.
According to ro
inverter model
2 ro, cfg
5.0 kHz
0.0 s
0.0 s
3.0 Hz
20.0 %
0.0 Hz
0.0 Hz
0.0 Hz
1 cfg
cfg
1 cfg
2 cfg
1
0.0 s cfg
ro
0 cfg
2.0 s
1.0 s
0 s
CFW100 | 15
Email: [email protected]