Cleaning & Maintenance; Disposal & Warranty - Parkside PGG-30 Instrucciones De Utilización Y De Seguridad

Pistola incollatrice a caldo
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Using the device / Cleaning & Maintenance / Disposal & Warranty
Changing glue nozzles:
Wear protective gloves.
Heat up the device for about 4 minutes.
Change the glue nozzles (8) when they
are warm.
Burn hazard! Touch the glue nozzle only
on the heat protection sheath (9). The tip of
the glue nozzle is hot and can cause burns.
4. CLEANING & MAINTENANCE
WARNING! Unplug the device
before inspecting or cleaning.
Never clean the glue gun's
electrical components with water
or other liquids. This could cause
an electric shock.
The hot-melt glue gun is maintenance free.
Always keep the device clean and dry.
No liquids should ever get inside the
device. To clean the housing, use a
cloth. Never use petrol (gasoline),
solvents or cleaners that attack plastic.
Additional glue sticks are available at
specialty stores. Be sure they are for the
right purpose and of the right dimensions
(11 mm in diameter).
Malfunctions
In the event of defects or malfunctions
that are not described above (e.g., a part
wearing out), please contact our customer
service (see the warranty card). The device
contains no parts that can be replaced by
the user.
5. DISPOSAL & WARRANTy
Environmental protection
To prevent damage during transport, the
appliance is delivered in stable packaging
that consists largely of recyclable material.
Please take advantage of the opportunity
to recycle the packaging.
Do not discard electrical
appliances together with ordinary
household waste. Pursuant to the
European Directive 2002/96/EC
on waste electrical and electronic
equipment (WEEE) and its
implementation in national law,
waste electrical and electronic
equipment must be collected
separately and delivered for
environmentally sound reuse and
recycling. Recycling alternatives
to returning the item: As an
alternative to returning the device,
in the case of a transfer of
ownership, an electrical device
owner is obliged to assist in proper
utilisation. The used device can
also be handed over to a
collection facility that will dispose
of it in keeping with the national
recycling and refuse law. Not
affected are accessory parts and
tools that accompany used
devices but contain no electrical
components.
Warranty
The warranty conditions can be found on
the separately enclosed warranty card.
GB/MT
29
Tabla de contenido
loading

Tabla de contenido