Olympus CAMEDIA C-700 Ultra Zoom Manual Básico página 24

BUTTON FUNCTIONS (Cont.)
(Macro/Spot) button
Metering methods and Macro mode
It is possible to select metering methods and focusing area. In
the mode, exposure is based on the value metered in the
center of the frame. In the
quickly in macro shooting. Each time you press the
(macro/spot) button, the spot metering/macro mode changes
as shown below.
Selections
OFF
24
mode, focusing is performed
Display
No display Digital ESP metering: Meters the center of the
(factory default subject and the area around it.
setting)
Determined by metering within the AF target
mark. Use this mode when backlight is
making the subject darker. (Spot metering)
Set the Zoom lever to the maximum "W"
position, then move in close to the subject (no
closer than 0.1m (0.3 ft)) so that you can fill
the entire frame with your subject. (Digital
ESP metering, Macro mode)
Use this mode when you want to use Spot
metering while shooting in the Macro mode.
(Spot metering, Macro mode)
OFF
Functions