Welding Process; Putting Out Of Operation; Maintenance And Cleaning - Abicor Binzel ROVO VTS Serie Instructivo De Servicio

VTS torch system

7.1 Welding process

8 Putting out of operation

9 Maintenance and cleaning

NOTE
• The VTS torch system may only be operated by qualified personnel.
• As the VTS torch system is integrated into a welding system, the operating
instructions of the welding components, such as welding torch and power
supply, must be observed during operation.
• For MIG/MAG welding, ensure that all the parameters are set at the
power supply for your welding task.
1 Open welding shielding gas supply.
2 Switch on the power supply.
1 Close the welding shielding gas supply.
2 Switch off the power supply.
Scheduled maintenance and cleaning is prerequisite for a long life and a
trouble free operation.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply.
• Close off the compressed air supply.
• Pull the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
8 Putting out of operation
EN - 15