Hamilton Beach 70825 Manual Del Usario página 6

How to Use Dicing Assembly
1
Place work bowl on base with
handle facing forward.
5
Place lid on bowl so the chute
lines up with the handle.
6
2
To insert the dicing assembly, lower the dicing disc onto the motor
shaft, making sure the removable grid is next to the handle. Then lower
the cutting disc onto the motor shaft until it sits flush to the dicing disc.
TIP: When using the feed chute to dice, slice, or shred, make sure no
other blades are in the bottom of the work bowl.
6
Raise locking arm up and over
bowl and snap into place.
w WARNING
Handle blades carefully; they are very sharp.
Press STOP and unplug before inserting or
removing blades.
3
7
Laceration Hazard:
4
Secure four latches of the dicing
disc into place.
Place large food pusher in
food chute. Add food and use
medium or small food pushers
for dicing.
NOTE: Unit will not work unless
locking arm is snapped into place
on bowl and large food pusher is
inserted.