Lenco PIR-645 Manual De Usuario página 8

c. Update from Network
Select your time zone and daylight savings is needed.
d. No Update
Set the date and time is needed.
3. The Wizard will now scan your location for accessible wireless networks.
When the scan has finished, a list of networks will be displayed.
Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the
list as [WPS].
4. Scroll "-Vol+/OK/Tune" knob and then press it to select a wireless network you want.
1) If a WEP/WPA key (password) is required, radio will ask you to input the
WEP/WPA code and display the password entry screen as follows:
Note: If a password (WEP/WPA) isn't required by your network, radio will connect to
the network automatically.
2) Scroll "-Vol+/OK/Tune" knob to cycle through the alphanumeric character list,
press "-Vol+/OK/Tune" knob to select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
3) After selecting the final character of your password, scroll "-Vol+/OK/Tune" knob
to "OK" and then press "-Vol+/OK/Tune" knob to confirm.
The radio is connected to wireless network.
4) If you wish to establish a connection via WPS, press "-Vol+/OK/Tune" knob after
you have selected desired network. The radio then offers the option to initiate
WPS.
Scroll "-Vol+/OK/Tune" knob to select through Push Button, Pin and Skip WPS,
press "-Vol+/OK/Tune" knob to confirm.
8