Maintenance And Repair - Amprobe BT Serie Manual De Usuario

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the operation of the tracer, the
following steps should be performed in order to isolate the cause of the
problem.
1. Check the battery. Replace the battery immediately if the Receiver LED
doesn't turn ON.
2. Review the operating instructions for possible mistakes in operating
procedure.
Except for the replacement of the battery, repair of the tracer should be
performed only by a Factory Authorized Service Center or by other qualified
instrument service personnel.
The front panel and case can be cleaned with a mild solution of detergent and
water. Apply sparingly with a soft cloth and allow to dry completely before
using. Do not use aromatic hydrocarbons or chlorinated solvents for cleaning.
7