U.S.Robotics 10/100/1000 Mbps PCI NIC Guia De Instalacion página 7

Windows NT Users:
Click Windows Start, Settings, and then Control Panel. Double-click Network and click the Adapt-
ers tab. Click Add and then click Have Disk.
Insert the Installation CD into your CD-ROM drive. Type D:\WINNT4 and click OK. If your CD-ROM
drive uses a different letter, type that letter in place of "D". Select the USR 10/100/1000 PCI NIC
and click OK. Follow the on-screen instructions.
When you return to the Network window, click Close. Remove the Installation CD from your CD-
ROM drive. You will then be prompted for the TCP/IP properties. Select the USR 10/100/1000 PCI
NIC from the adapter pulldown menu.
Assuming you are connected to a network, if you know your IP settings, select Use the following
IP address and enter the information in the appropriate fields. If you do not know your IP set-
tings, select Obtain an IP address from a DHCP server and click OK.
Follow the on-screen instructions and then click Yes to restart your computer.
Windows XP Users:
When the Found New Hardware Wizard detects the U. S. Robotics 10/100/1000 Mbps PCI NIC,
select Install from a list or specific location and click Next. Select Search for the best driver in
these locations and then select Search Removeable Media. Click Next. Insert the Installation CD
into your CD-ROM drive.
After the driver installation is complete, click Finish to complete the installation procedure
Linux Users:
The CD-ROM includes the drivers for your operating system. On the CD-ROM you can locate the
folder containing the driver that applies to your operating system.
*You may receive a "Digital Signature Not Found" or "Hardware Installation" screen. Click Yes or Continue Any-
ways. U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and has veri-
fied compatibility with Windows 2000, Me, and XP. Because U.S. Robotics wants its customers to take full
advantage of the network card's functionality, it has made the drivers available.
3