Power On Settings - Promax GR-205 Manual De Instrucciones

Bit 7 - Not used.
Bit 6 - RQS/MSS. This bit, as defined by IEEE Std. 488.2, contains both the
Requesting Service message and the Master Status Summary message.
RQS is returned in response to a Serial Poll and MSS is returned in
response to the *STB? command.
Bit 5 - ESB. The Event Status Bit. This bit is set if any bits set in the Standard
Event Status Register correspond to bits set in the Standard Event Status
Enable Register.
Bit 4 - MAV. The Message Available Bit. This will be set when the instrument
has a response message formatted and ready to send to the controller.
The bit will be cleared after the Response Message Terminator has been
sent.
Bit 3 - Not used.
Bit 2 - Not used.
Bit 1 - Not used.
Bit 0 - Not used.

5.5.4 Power on Settings

The following instrument status values are set at power on:
Status Byte Register
Service Request Enable Register (SER)
Page 26
Status Model
USER'S MANUAL. GR-205
= 0
= 0
09/2004