Assembly Of Machinery; Assembly Of The Emergency Overflow - Graf Klaro E Professional Instrucciones Para El Montaje

4.1

Assembly of the emergency overflow

The emergency overflow prevents coarse material from entering the SBR reactor in the event of damage.
The emergency overflow consists of:
1 x HT - T-piece 87°, DN 70
2 x HT - pipe DN 70; l = 150 mm
1 x HT - 87°bend DN 70
1 x lip seal DN 70
The emergency overflow is not included in the set-up kit. This can be ordered separately from
Otto Graf GmbH (item no. 107197).
For fitting purposes, an opening of 83 mm must be produced in the dividing wall with a core drill. The
position of the hole can be seen in the drawing. The DN 70 seal and pipe piece should be inserted into
the hole and the T-piece fitted on.
[email protected]
www.graf.info
4.

Assembly of machinery

15 / 44