Special Instructions - Sunbeam 3932 Manual Del Usuario

Your
l
Do
on an unprotected surface, even if it is on its heel rest.

SPECIAL INSTRUCTIONS

This is a 400 watt appliance.. To avoid a circuit
l
overload, do not operate another high wattage
appliance on the same circuit.
If an extension cord is absolutely necessary,
l
a lo-ampere cord should be used. Cords rated
for less amperage may overheat. Care should
be taken to arrange the cord so that it cannot
be pulled or tripped over.
This appliance was set at the factory to operate at
l
120 Volts. Refer to Operating Instructions Section
of this manual for conversion to 240 Volt operation.
Be sure dual voltage selector is in the correct voltage
l
position before operation. Before plugging iron into
outlet, read the information about dual voltage
operation in the "Voltage" section of this manual.
To reduce the risk of electrical shock, this appliance
l
has a polarized plug (one blade is wider than the
other). This plug fits a polarized outlet only one way;
if the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician.
SAVE THESE
INSTRUCTIONS *
Iron is designed to rest on the heel rest.
not leave the iron unattended.
Do
not attempt to defeat this safety feature.
Do
not set the iron
3