Adjusting The Speed; Tips And Advice On Operation - SOMFY Tilt&Lift 25 RTS Manual De Instrucciones

EN

3.4.6. Adjusting the speed

1) Move the driven product away from the end
limits. Press and hold the UP, MY and DOWN
buttons simultaneously, until the driven
product briefly moves Up and Down once.
The driven product will move UP and Down
automatically in 10 second cycles to validate
entering in speed adjustment mode.
2) To increase the speed, press and hold the UP
button until the driven product briefly moves up
and down. Repeat as needed.
Maximum speed is reached when the driven
product moves briefly 3 times in one direction
and 3 times in the other direction.
3) To decrease the speed, press and hold the
DOWN button until the driven product briefly
moves up and down. Repeat as needed.
Minimum speed is reached when the driven product moves briefly 3 times in
one direction and 3 times in the other direction.
4) To confirm the new speed, press and hold the MY button until the driven
product briefly moves Up and Down.

3.5. TIPS AND ADVICE ON OPERATION

Questions about the Drive?
Observations
The motorised
product does
not operate.
If the motorised product still does not work, contact a motorisation and home
automation professional.
26
Possible causes
One or more batteries have
been mounted backwards.
One or more batteries leak
in the battery tube.
Batteries (inside battery
tube) are weak.
The control point battery is
weak.
Copyright 2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
1
10 s
2
4
Solutions
Verify that batteries are all
mounted in the correct manner.
Replace the batteries.
Check whether the batteries are
weak and replace if necessary.
Check whether the battery is
weak and replace it if necessary.
Tilt & Li 25 RTS
10 s
3