Green Star ELITE Manual De Intrucciones página 17

D. Making Pasta (with the optional accessory)
How to assemble the Pasta Maker Set onto your machine.
Instructions:
1. Attach the Twin Gear Housing to the juicer body
2. Remove the Jumbo Twin Gears from the machine and insert the Pasta Screw onto the motor
drive shaft (left side as you are looking at the front of the body.)
3. Put the Pasta Guide over the Pasta Screw, making sure the long side of the Pasta Guide faces
the left side.
4. Select the desired pasta setting from the two shapes provided on the Pasta Screen and fit it
onto the Pasta Guide.
5. Close each latch over the ears of the Pasta Screen and snap the latches shut by pushing back
on the metal tabs.
6. The machine is now ready to make pasta.
Note: Be sure the dough is not too moist.
Pasta Screen
Pasta Guide
Pasta Screw
EN
ES
17