Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
indication of detection head clogging:
CAution: when this problem arises, the detection head
should be cleaned as quickly as possible
(see Maintenance).
indicates the state
Detector at the source
the unit flashes 8 times
of the fault indication
over an 8-sec period
other wired
inter-connected
detectors
If the sound indication of the soiled detector head state is
released at an inappropriate time, it is possible to postpone its
occurrence for an 8-hour delay over a maximum 7-day period
by pressing the test key until the 1st beep is released. This is
the time period available for cleaning the detector.
Radio fault on the control panel:
Following a system command, the control panel issues the
following voice message: "beep, fault, radio, detector X".
Red signal LeD
White
indicator
of the detector
LeD
-
-
-
Built-in audible alarm
the unit releases
8 fast beeps every 58 sec.
-
46
8. Maintenance
8.1 Detector head
maintenance
The regular maintenance of
the detector is of utmost
importance. The detector
head slots are to be vacuum-
cleaned at least once a year
or upon each indication of
detector head soiling (see
section on Fault indication).
CAution: if the detector
head dirty indication
remains after dusting,
replace the detector.
We advise you to clean
detector using a soft cloth.
never use alcohol
or acetone to clean it.
Capítulos
Tabla de contenido
