Reassembling The Loctite; Vari-Drop - Henkel Loctite Shot Miser Manual De Operación

6. Maintenance and Cleaning

6.2.3 Reassembling the Loctite

Henkel Loctite Corp.
Air Cylinder
Cilindro De Aire
# 986131
Depress The Vari-Drop™ Lever To
Horizontal Then Slide The Vari-Drop™
Down Into The Clamp.
• Connect the product supply tube to the Loctite
• Connect the control air line to the fitting on the air cylinder.
• Attach the Loctite
• Prime the Loctite
• The Loctite ® Vari-Drop™ is now ready for operation.
®

Vari-Drop™

Apply Lithum Grease To
Vari-Drop™ Lever
Position #10-32 Screws
In Clamp & Cover
Henkel Loctite Corp.
Cilindro De Aire
Figure 6.
® Vari-Drop™ to the mounting bracket.
® Vari-Drop™ per the instructions on page 8 of this manual.
Vari-Drop™
Air Cylinder
# 986131
Then Slide The Vari-Drop™ Forward Into The
Clamp So That The Luer-Lok Adapter Is At
The Specified Dimension Beyond The Clamp.
® Vari-Drop™.
Position Cover Over The
Vari-Drop™ & Clamp
Shot Miser™
Dispense Valve
Válvula Dosificadora
# 98085
Replacement Parts:
Refacciones:
Vari-Drop™ Valve / Válvula:
# 97132
Air Cylinder / Cilindro De
Aire:
.100
# 986131
11