Care And Cleaning - JENN-AIR JBL 800 Guia Del Usuario

Care and Cleaning

Injury Hazard – Unplug blender before cleaning. Failure to do so can result in injury.
1.Touch the "OFF" pad to set the blender into its full-
off state. Unplug the power cord.
2. Position blender pitcher over a sink to catch any
remaining ingredients in the pitcher while taking it
apart to clean.
3. Unscrew the base ring from the base of the pitcher
(see illustrations A and B). If the base is difficult to
unscrew, place the pitcher on the power base and
turn the pitcher counterclockwise with both hands
to loosen and remove (see illustration C). DO NOT
turn the pitcher using the handle.
4. Carefully disassemble the pitcher gasket and the
blade base, keeping fingers away from sharp edges of
the blades.
5. All of the pitcher parts should be washed in warm,
soapy water.The pitcher jar is dishwasher safe.The
pitcher lid, base ring and blade base are all top-rack
dishwasher safe.The pitcher gasket and lid cap can be
handwashed in warm, soapy water.
6.Wipe down the blender power base, including the
glass touch controls with a damp cloth. DO NOT
immerse the blender base in water. Do not use an
abrasive cleaning pad on the power base unit.
7. DO NOT use pine-based cleaners or cleaners con-
taining bleach on the blender base. Do not use any type of solvent-based
cleaner or metal polish on the power base unit. Use of these products may
cause staining or discoloration. If these cleaning products DO come in contact
with the power base, immediately clean with a water-dampened cloth and
wipe dry.
WARNING
12
A
B
C