Krups PERFECT MIX 9000 Manual De Instrucciones página 8

NEW IFU BLENDERPERFECT_Mise en page 1 08/07/13 17:42 Page12
English
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
Leak from the lid
Leak at the bottom of
the blender jug
The blade does not
turn easily
YOUR APPLIANCE STILL DOES NOT WORK?
Contact an approved service centre (see list in service booklet).
10
CAUSES
The plug is not connected
The blender jug is not
positioned correctly on the motor unit
Overload
The product is not placed on a flat
surface
Volume of ingredients is too high
Volume of ingredients is too high
The lid is not correctly positioned
The blender jug gasket seal (e2) is
not positioned correctly or is absent
Pieces of food too large or too hard
Liquid has been blended that was too
hot and distorted the gasket seal
SOLUTIONS
Connect the appliance to a socket
with the same voltage as that on the
rating plate of the appliance.
Check that the blender jug is
positioned properly on the motor unit
as explained in the leaflet.
Follow the instructions in § First use.
Place the appliance on a flat surface.
Reduce the quantity of ingredients
processed.
Reduce the quantity of ingredients
processed.
Place the lid correctly on the blender
jug.
Reposition the gasket seal and lock
the blade holder correctly.
Replace the gasket seal with a new
one.
Reduce the size or quantity of ingre-
dients processed. Add liquid.