Black and Decker Price Pfister Contempra 526 Serie Guia De Inicio Rapido página 3

7
7 CONTROL BODY INSTALLATION
Hold Base Ring (7A) to Control Body (7B) and place Gasket (7C) under Base
Ring (7A). From above sink, insert Threaded Shank (7D) and Flexible Tubing
(7E) through end hole of sink.
8
8B
8 SECURING CONTROL BODY
From underneath sink, secure the faucet by placing the Metal Washer (8A) and
threading the Long Nut ( 7 / 16 Hex.) (8B) onto the Mounting Post (8C). Make
sure that the bumps on the Metal Washer (8A) are facing up. Tighten using a
slotted screwdriver or an adjustable wrench until the faucet is fi rmly connected
to the sink. Do not over tighten!
7B
7D
7A
7C
7E
8C
8A
8B
ENGLISH
9
9C
9A
9 PULL-OUT HOSE ATTACHMENT
From underneath sink, push Quick Connect Housing (9A), located on the end
of the Pull-Out Hose (9B) fi rmly upward onto the Receiving Tube (9C), until
unable to push any further. Pull down on the Quick Connect Housing (9A). If
the housing and the Inner Collect (9D) separate slightly but do not pull off, the
Receiving Tube (9C) quick connect is secure.
10
10A
10C
10 WEIGHT ATTACHMENT
Your faucet includes a weight which is not required, but will help to retract the
hose during pullout operation. Attach weight (10A) to the hose using Spring
Clip (10C) at the lowest point on the hose (10B).
3
9D
9C
9A
9A
9B
10A
10B