First Start And Internet Connection - Ariston SENSYS NET Instrucciones De Instalacion Y Uso

5. FIRST START AND INTERNET CONNECTION
After installing the product, switch on the heating system. The
gateway switch on as it is powered by the BridgeNet BUS.
1. For several moments, the gateway performs its startup
procedure, during which all the LEDs flash in sequence in red.
2. After a few seconds, the BUS LED turns green and the WEB
LED stays fixed red.
5.1 WI Fi configuration
Once you have checked that the ADSL router is running:
1. press and hold the AP button (for at least 5 seconds) until the
WEB LED flashes green. After a maximum of 30 seconds, the
gateway creates a new WiFi network that remains active for 10
minutes, after which you will need to repeat the procedure.
WARNING!
Ariston Net supports the following encryption for Wi-Fi net-
works:
- WEP
- WPA/WPA2 Personal
2. Open the network settings of your internet device (smart-
phone, PC, Tablet...) and search for available Wi-Fi networks.
Select the Remote GW Thermo network.
GB / 39