Operation; Preparation; Installation - Beko SJA 2209 T Manual De Usuario

3

Operation

3.1 Preparation

1. Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulations.
2. Before using the appliance for the first time,
clean parts which come into contact with food
(see the "Cleaning and care" section).

3.2 Installation

1. Place the cylinder chamber (4) on the body
(18) so that the pulp and juice outlets are on
the front.
WARNING: Make sure that the
silicone plug under the juice outlet
A
(12) is closed before placing the
cylinder chamber (4). Otherwise,
the extracted juice will flow over the
body (12).
2. First, place the
(3), then place the cylinder chamber (4) into
the body (12). The ( ) symbol on the cylinder
chamber (4) corresponds to the ( ) symbol on
the fruit / vegetable strainer (7).
3. Place the press screw (11) into the filter. If
the press screw (11) is not properly fitted, the
hopper (2) cannot be assembled.
4. Place the hopper (2) in a way that the ( )
symbol is aligned with the ( ) symbol on the
cylinder chamber (4) .
8 / 72 EN
spinning brush
Slow Juicer / User Manual