golmar IT-4N Manual De Instalación página 55

54
System compatibilities:
The telephone interface can be installed in 4+N audio door entry systems and Plus systems,
O
however in the case of the latter it must be installed together with the CD-PLUS/4+N digital
converter.
To define the system in which the interface is installed, it must be configured by the
O
the following field values:
"0" For systems: 4+N ó 4+N CO.
Ü
"1" For systems: PLUS.
Ü
In installations with Plus systems and telephone interfaces, see the TCD-PLUS4N leaflet which
O
is supplied with the converter. It explains its installation, programming, and start-up.
Divert type:
In installations where the interface is installed with PABXs that are not fully transparent, that is,
O
they don't transmit the pick up or hang up signals, the
options:
"0" Normal operation, the PABX is transparent.
Ü
"1" Operation with PABX, the PABX is not fully transparent.
Ü
With this option, to end the call received on the diverted telephone press the " " key and
replace the handset.
Pick up detection:
In installations where the interface is installed with PABXs that are not fully transparent, on pick
O
the handset up a delay of a few seconds can occur before initiating communication. To deal with
this delay the
installer
"0" With a delay of a few seconds on initiating communication.
Ü
"1" No delay. With this option, when a call is received on the diverted telephone pick the
Ü
handset up, then press the " " key to initiate communication.
Note: The "pick up detection" programming field is enabled only if the "divert type" programming
O
field is set to "1".
has the following configuration options:
*
PROGRAMMING
has the following configuration
installer
using
installer
*