Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
8
Apply silicone weather sealant (not included) around the back of the junction box and
mounting surface for moisture seal. Installation is complete. Remove the protective
film from the camera.
9
Turn the electricity back on and allow the camera to power up. This can take up to a
minute.
When the camera starts blinking blue, it is ready to be paired with your Wi-Fi network.
10
Pair the camera and test for correct operation. From the SAFE by Swann app, select
Pair Camera > Swann Floodlight Camera and follow the on-screen instructions to
complete the camera setup.
TIP If you have a light switch that controls the floodlight unit, remember not to turn off the
switch as this will also turn off the camera. The camera needs to be powered at all
times to stay connected to your Wi-Fi. Put a sticker label so that people know not to
turn it off.
For more details on using your Swann Floodlight security system such as live
streaming, activity recording and playback, and camera configuration including
floodlight and siren settings, see the SAFE by Swann manual which is available via the
SAFE by Swann app menu.
9
Englis h
EN
Tabla de contenido
