Mains Supply And Extension Cable; Before Connection To The Mains Supply; Maintenance, Cleaning And Repairs; Working With The Machine - AL-KO SOLO 165 Manual De Instrucciones

1.5 Mains supply and extension cable

x
Only extension cables approved for outdoor use with a
minimum cross-section as shown here are permissible
as mains extension cable.
- The cable connectors must be made from
rubber or must be covered in rubber.
-
When using a cable reel, fully unreel all cable.
x
Check whether the mains supply voltage matches the details on the type plate of the power tool.
x
The mains socket must be protected at least by a 10 A - 16 A fuse. x
For your personal safety, we recommend the use of a 30 mA RCD.

1.6 Before connection to the mains supply

Before taking the power tool into use, check it fully for perfect condition.
x
The ON/OFF switch must be able to move freely and must automatically return into the stop position.
x
The cutters and guard must be tightly secured and in perfect condition.
x
The mains cable, which is part of the equipment, and the extension cable must be in perfect condition.
Should the check reveal any irregularities or recognisable damage (also to the frame) or reduced
efficiency of the machine, do not commence work. Take the power tool to a specialised workshop and
have it checked.

1.7 Maintenance, cleaning and repairs

Only carry out those maintenance jobs and repairs, which are described in this manual. A specialised
service centre will carry our all other jobs.
x
Before cleaning, maintenance or repairs, always switch OFF the motor and pull the mains supply plug
from its socket.
x
For any repairs only use original parts from the manufacturer.
x
Never hose down the power tool – not even for cleaning.

1.8 Working with the machine

x
Only use this power tool when it is complete and in a safe condition.
x
Work conscientiously, thoughtfully and calmly, and do not endanger third parties.
- Pay attention to good visibility and lighting conditions.
- Always remain within earshot of other people who can provide help in case of emergency.
- Plan for timely work breaks.
- Pay attention to possible hazards and take appropriate precautions.
- Exercise caution when the ground is wet or covered in ice and snow, on overhangs, or uneven
terrain. There is an increased risk of slipping!
- Pay attention to the risk of stumbling and obstacles, such as tree roots and stumps, edges, etc. Pay
particular attention to safety when working on slopes.
- Before commencing work, check the working area for stones, broken glass, nails, wire or other solid
objects and remove such debris to prevent them being picked up and thrown out by the cutters.
- Always hold this power tool firmly in both hands, and ensure your safe and solid foothold.
- Keep all body parts away from the blades. Always cut away from your body.
- Always cut in an efficient and correct manner (see chapter 6.2 "Correct operation of your power
hedge trimmer ").
- Never cut above shoulder height, at a distance from your body or while standing on a ladder. If
cutting at height is required, use a hydraulically operated cabin lift.
- Never touch the ground with your running hedge trimmer.
- Never use the hedge trimmer to lift away or move pieces of wood or similar materials.
- Only use the device with sharp and undamaged blades and avoid damaging the blade on foreign
objects.
x
Stop the motor if the device behaves in any way unusually.
x
The trimmer blade should only be touched for cleaning or to remove blockages once the blade has
stopped. Protective gloves must also be worn.
First Aid
A first aid box should always be available on-site. Immediately replace any materials you have used.
Cable length up Minimum cable cross-
to
7 m
50 m
75 m
Safety regulations
section
2
1.2 mm
2
1.6 mm
2
2.0 mm
ENGLISH 5