Labels - hager TX460 Instrucciones De Uso

9.1 Labels

This menu allows to indicate what function is associated with
each button in PB Control mode. This requires associating a
pictogram with each label.
Adding a label
• Select Add using button
• Press button
When information has been entered in all labels, it is
necessary to Clear an existing label before a new label can
be added.
Selecting a label
Four labels are available (one per button).
• Select the label using buttons
and
• Press button
Then the screen displays a request for
entering a pictogram.
Label 1 = upper section of the screen
Label 2 = right-hand section of the screen
Label 3 = lower section of the screen
Label 4 = left-hand section of the screen
100
and .
to enter Select a label.
.
to confirm.
Entering a pictogram
• Select the pictogram desired using
button
• Press button
pictogram.
Selecting a status indication
A status indication can be added to each label to display the
status of the function. The status indication is displayed by
means of the following symbols:
• ON
OFF
°
• Select Yes or No using button
and
• Press button
Confirming the label
The pictogram and its status indication are displayed in the label.
• Press button
The
regulation returns automatically to
Labels screen Add/Clear.
Then starting Configuration menu is again possible by pressing
◀
button C.
101
and .
to confirm the
.
to confirm.
to confirm.
environment control and