Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A
1
Insert the back top support
tube (C) as well as both shelf
support tubes (E) into the
exposed tube housings in the
left side leg sub-assembly (A)
as shown. Align the support
tubes such that the holes in
the support tubes line up with
the threaded housings in the
side leg sub-assembly. Using
3 of the provided machine
screws, tightly secure the
support tubes into the side leg
sub-assembly.
3
D
Insert the towel bar (D) into the two exposed holes on the upper
front legs of the the console assembly. Using the final 2 machine
screws, tightly secure the towel rack to the console.
B
D
CONSOLE ASSEMBLY
A
3x - included
machine screws
C
E
2x - included
machine screws
8719 CONSOLE TABLE COMPONENTS LIST
ITEM #
QTY.
A
1
B
1
C
1
D
1
E
2
F
1
G
8
C
E
2
Insert the right side leg
sub-assembly (B) into the
exposed ends of support
tubes (C, E) as shown.
Make sure to align the
support tubes holes to the
threaded portion of the
side leg sub-assemblly
housings. Using 3 of the
provided machine screws,
tightly secure the support
tubes into the right side
leg sub-assembly.
4
Adjustable foot
bumper
Place assembly into approximate
installation position. Use a level and
the four independently adjustable
foot bumpers to ensure the console
assembly is level both side-to-side
and front-to-back.
Note: Wait until after final installation
of console and sink to assemble
glass shelf onto shelf support and
remove protective film.
2
DESCRIPTION
LEFT SIDE LEG SUB-ASSEMBLY
RIGHT SIDE LEG SUB-ASSEMBLY
BACK TOP SUPPORT TUBE
TOWEL BAR
SHELF SUPPORT TUBE
TEMPERED GLASS SHELF
M4 x 0.7 PHILLIPS HEAD MACHINE SCREW
F
G
3x - included
machine screws
B
C
E
Level side-to-side
Level front-to-back
Feet are adjustable
7302 24 2 -100 Rev. A
Tabla de contenido
