Important - Beurer BF 100 Body Complete Instrucciones Para El Uso

• Hold the control unit with the lower part of
your thumb pressed firmly on the front elec-
trodes and your fingers pressed firmly on
the rear electrodes.
Following the weight measurement, impedance is measured for the
analysis. The upper body is measured by the 4 electrodes on the
control unit, the lower body by the 4 electrodes on the scale. This is
indicated by the symbol of the current flowing through the body.

Important:

Stand still with your weight distributed evenly on both legs. Please note that there
must be no skin contact between feet, legs, calves and thighs. Otherwise the
measurement will not be performed correctly. To prevent skin contact, you can
wear, for example, a lightweight pair of trousers.
3 Result
The overview is displayed.
For the analysis, see "Analysing
results" on page 36.
When the unit is switched off, the
measurement is saved automatically.
If several measurements are taken
on one day, only the last measure-
ment is saved.
Analysis of the measured values following a measurement
Graph
Weight
• Press the [ ] menu button on the
control unit to switch to individual
submenus or memories.
The progression of your body weight
is shown from measurement to mea-
surement. Newer measurements are
added on the right. The reference line
represents your target weight.
Body fat
• Use the [ ,
the body fat graph. The progres-
sion of your body fat is shown from
measurement to measurement.
The reference line represents the
average value of all body fat meas-
urements, the bars indicate
whether the values have moved up
or down.
] buttons to switch to
You must define a target weight
in order to be able to display the
progression of your body weight,
see page 30. You can change
the target weight at any time.
33