Spray Function - Philips Azur Cordless HI575 Manual Del Usuario

ENGLISH
12
Features

Spray function

You can use the spray function to remove stubborn creases at any
temperature.
Make sure that there is enough water in the water tank.
C
1 Press the spray button several times to moisten the article to
be ironed.
Shot of steam
A powerful shot of steam helps remove stubborn creases.
C
1 Press and hold the shot-of-steam button for a few seconds.
Then release the button.
The shot-of-steam function can only be used at temperature
settings between 2 and MAX.
Vertical shot of steam
C
The shot-of-steam function can also be used when you hold the
iron in vertical position.
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
Turbo steam (HI575 only)
The turbo-steam function helps remove difficult creases.
The turbo-steam function can only be used at temperature
settings between 3 and MAX.
C
1 Press and hold the turbo-steam button for a few seconds.
Then release the button.
Do not keep the button pressed for more than 10 seconds. Wait at
least one minute before using the turbo-steam function again to let the
iron heat up again. The iron is hot enough when the temperature light
goes out.