Nussbaum SMART LIFT 2.30 SL Instrucciones De Servicio página 113

Time frame Type of
maintenance
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
12 x / 12
9 3
4
8
5
7
6
12
11 1
2
10
1 x / 12
9 3
4
8
7 5
6
OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL - HYMAX S 3000-S3500-S4000_V1.2_DE-EN-FR-ES-IT
Maintenance plan
Check the DU bearing of the spindle guide for wear. Slightly
oil with a runny oil similar to SAE 15W40.
Lifting arm booms, lifting arm bolts, carrier plate threaded
bolts are to be checked for ease of running. If required, lightly
grease with a multi-purpose grease. Do not over-lubricate.
Check the foot bumper for condition and function. Exchange
if damaged
The rubber acceptance plate is to be checked for wear and
replaced if necessary.
Lubricate the safety nut lubrication nipple once per month
with multi-purpose grease. This is done through the provided
hole in the lifting rails. For this, the spindle cover (see g) must
be removed and pulled upwards.
Over-lubrication of the safety nut by intensive lubrication or
lubrication with grease or molycote leads to a reduction of
the effectiveness and the lifting performance of the lift. This
must be avoided. If required, degrease the lift spindle and
slightly oil as described.
Check the tracks and the lift rail equalization parts for wear.
After cleaning, grease with a multi-purpose grease.
Pos.
H
J
K
O
L
M
N
P
113