Idiomas disponibles
Idiomas disponibles
The Aqua Medic Top End Filter is a ready to use demineralization filter for removing silicate, nitrate and other
ions from osmosis water. Since silicate and nitrate are very small ions, they are held back to a lesser extent by
osmosis systems.
1. Included in shipment
-
Filter housing
-
Grid plate with pads
-
Fleece
-
Sealing ring for filter lid (already mounted)
-
Wall bracket
-
Double clip
-
2 fittings plus sealing (for osmosis units)
-
Hose
2. Technical data
Height: app. 330 mm
Diameter: app. 71 mm
Volume: 500 ml
Connection thread: ¼"
Connections: ¼" fitting for 6 mm osmosis hose
3. Safety instructions
-
When assembling, ensure that the seal is correctly positioned.
-
Check the filter cartridge for leaks.
-
Discard the first 2-3 liters of water produced with fresh resin.
-
Keep it out of reach of children.
-
Take care that nothing gets in the eyes.
Hazard warning (resin):
H318 Causes serious eye damage.
4. Connecting and starting
The Aqua Medic Top End Filter is connected to the pure water outlet of an osmosis system with the 6 mm
osmosis hose. It has always to be installed vertically. The flow must always be from bottom to the top so that no
air buffers or poorly perfused zones form.
Fig. 1: 1. Grid plate with pads (already mounted) 2. Fleece (already mounted) 3. Connection fittings
4. Hose 5. Double clip 6. Wall bracket
Operation Manual ENG
5
