PCE Instruments PCE-IR 53 Serie Guía Del Operario página 17

Address Length
(words)
0x06 1
0x08 1
0x0A 1
0x0C 1
0x0E 1
0x10 1
0x12 1
0x14 1
0x16 1
0x18 1
0x1A 1
0x1C 1
0x1E 1
0x20 1
0x22 1
0x24 1
0x26 1
Description
Unfiltered object temperature
Sensor temperature
Maximum temperature over hold period
Minimum temperature over hold period
Average temperature over hold period
Filtered object temperature
PCB temperature
Emissivity (1 LSB = 0.0001)
Minimum 0.2000, Maximum 1.0000
Reflected temperature
Sensor status register
Bits 0..1 - Reserved
Bit 2 - Hold processing on (1)/off (0)
Bit 3 - Hold peaks (1)/valleys (0)
Bits 4..6 - Reserved
Bit 7 - Reflected energy compensation on (1)/
off (0)
Bits 8..15 - Reserved
Average period (1 LSB = 0.05 seconds)
Minimum 0.05 seconds, Maximum 60.00
seconds
Hold period (1 LSB = 0.05 seconds)
Minimum 0.05 seconds, Maximum 1200.00
seconds
Temperature at 4 mA
Minimum -20°C, Maximum 900°C
Temperature at 20 mA
Minimum 80°C, Maximum 1000°C
Alarm 1 setpoint
Minimum -20°C, Maximum 1000°C
Alarm 1 hysteresis
Minimum 0°C, Maximum 1000°C
Alarm 1 status register
Bit 0 – Relay triggered (R)
Bit 1 – Visible alarm active (R)
Bit 2 – Alarm triggered (R)
Bit 3 – Auto reset (1)/manual reset (0) (R/W/
MW)
Bit 4 – Alarm acknowledge (R/W/MW)
Bit 5 – Alarm reset (R/W/MW)
Bits 6..7 – Reserved
Bit 8 – High alarm (1)/low alarm (0) (R/W/MW)
Bit 9 – Alarm enabled (1)/disabled (0)
Bits 10..15 – Reserved
R/W/MW
R
R
R
R
R
R
R
R/W
R/W
R/W/MW
R/W
R/W
R/W
R/W
R/W
R/W
R/W/MW
1 7