PCE Instruments PCE-IR 53 Serie Guía Del Operario página 13

Fixed Mounting Bracket (FBS )
50
2 x Mounting Holes M4 Clearanc
24
9
ACCESSORIES
A range of accessories to suit di
may be ordered at any time and added on-site. The following accessories are available from PCE Instruments
Fixed mounting bracket
dimension. Model number: FBS.
Adjustable mounting bracket
dimensions. Model number: ABS.
Air purge collar (see above for dimensions): The air purge collar is used to keep dust, fumes,
moisture, and other contaminants away from the lens. It must be screwed fully onto the
sensing head. Air
be 5 to 15 l/min. Clean or 'instrument' air is recommended. Model APSW is for use with
sensors with 2:1 optics. Model APSN is for use with all other PCE-IR 53 models.
Laser sighting tool:
sighting tool pinpoints the centre of the measured spot. Model number: LSTS.
MicroSD Card:
adapter. Model number: MSD.
OPTIONS
The following options are available. Options are factory installed and must be ordered with the
sensor.
Calibration
three points across the sensor' s temperature range. Model number: CALCERTA.
Extended Cable
as standard. Extra cable can be added to this in increments of 1 m. Model number: PMCE
(-MA models), PMCEHT (-HA models).
M16 Clearance
10
40
25
e
60° Rotation
rent applications and industrial environments is available. These
(see above for dimensions): Allows rotational adjustment in one
(see above for dimensions): Allows rotational adjustment in two
into the 1/8" BSP
When to the sensor during installation or re-alignment, the laser
Stores logged data. For use with -BRT and -CRT models. Includes SD Card
UKAS traceable
(30 m maximum total cable length): 1 m cable is supplied with each sensor
Adjustable Mounting Bracket ( A BS )
9
40
50
2 x Mounting Holes M4 Clearance
24
9
60° Rotation
and out of the front aperture. Air
showing the measured temperature at
15
60° Rotation
25
48
should
13