Lead Connection - BIOTRONIK Reocor S Manual Tecnico

12
Figure 3: Unlocking the protective cover
Caution!
Note:
To release the protective cover (see Figure 3):
Push the release lever up with one hand.
At the same time, use your other hand to slide down the
protective cover.
To lock the protective cover:
Slide the protective cover upwards along the rail until it
locks into place (see Figure 2).
The protective cover can be removed completely for cleaning.
Push the cover all the way down to the stop and then remove
it.
During use of Reocor S, the protective cover must be locked
to prevent inadvertent resetting of the rotary switch and con-
trol dial, and thus of the programmed parameters.

Lead Connection

Reocor S has two connector ports for direct connection of
leads with touch-proof 2-mm plugs.
To connect cables with Redel plugs, the Redel adapter must
be fitted on the correct side and screwed in (Figure 4). The
Redel adapter is attached to the correct side if it can be
screwed on to the Reocor S.
The function of the Redel adapter is only guaranteed if it is
attached to the correct side!