Cleaning The Enclosure; Ordering Replacement Parts And Accessories - Federal Signal 224XST Instrucciones De Instalación Y Mantenimiento

h. Push down on the dome and turn it clockwise until it locks
into place (approximately 3/4 in [19 mm]).
i.
Insert and tighten the retaining screw into the bottom of the
dome.
j.
Apply power and test the light for proper operation.

Cleaning the Enclosure

The fixture should be cleaned periodically to maintain maximum
light output. Use only mild, non-abrasive cleaning agents. The dome
should be regularly inspected for scratches and chips, and if damaged,
it MUST be replaced.

Ordering Replacement Parts and Accessories

EXPLOSION HAZARD: Substitution of components may impair
suitability for Class I, Division 2.
Typical spare parts are listed in Table
component parts are not available for field replacement. Lights with
this type of damage must be either replaced entirely or returned to
Federal Signal for
parts, please call Federal Signal Customer Support at 708-534-4756
or 877-289-3246.
Description
Lens, Amber
Lens, Blue
Lens, Clear
Lens, Green
Lens, Magenta K8550C095-07 PCBA, 240 Vac
Lens, Red
Electraray
Installation and Maintenance Instructions
service. To order accessories and replacement
Table 1 Replacement Parts
Part Number
K8550C095-02
K8550C095-01 Strobe Tube
K8550C095
K8550C095-04 PCBA, 120 Vac
K8550C095-03 Gasket, Dome
Models 224XST, 225XST, and 225XST-I
®
1. Due to certification, certain
Description
Dome Exterior,
Clear
PCBA, 12-24 Vac K2001202
Part Number
K8444D219-04
K8107177
K2001905
K2001905-01
K8444286
15