Samson AirLine 88x AH8 Manual Del Usuario página 12

AH8 Headset Transmitter Callouts
4
1. Power/Mute Button - Press and hold for 3 seconds to turn the unit on or off. A quick press
and release will mute or unmute the transmitter when the transmitter is on.
2. Status Indicator - This LED displays the operation mode, low battery and recharge status
of the transmitter. The chart defines the LED colors for each function.
3. Volume +/– Buttons - Press and hold either Volume button to adjust the volume. Pressing
the + or – button increases or decrease the level by one step with each push of the
button. There is a total 9 volume levels. The Status Indicator light will flash faster for each
increased step and slower for each decrease.
4. IR Lens - This window is used to capture the infrared signal sent from the receiver during
the IR SET to channelize the transmitter. The IR Lens is only active for the first 10 seconds
when the transmitter is powered on.
5. Charging Connector - Connect the supplied magnetic charging cable to this sealed, gold
contact charging connector to recharge the internal Lithium Ion battery. The AH8 can be
recharged by connecting the cable to a USB connector on a computer USB port, or any
5-volt DC adapter that has a USB output.
NOTE: The included adapter will charge the AH8 faster than a computer USB port.
6. Microphone - Waterproof, micro-miniature, unidirectional microphone capsule in a marine-
grade stainless steel housing.
12
1
2
6
GREEN
AMBER
Flashing RED
RED
3
Normal Operation
Mute
Low Battery
Charging
Fully Charged
5