Symbols Used In This Manual; Symbols On The Appliance; For Your Safety; Intended Use - Flex MS713 Instrucciones De Funcionamiento Originales

Contents
Symbols used in this manual . . . . . . . . . 12
Symbols on the appliance . . . . . . . . . . . 12
For your safety . . . . . . . . . . . . . . . . . . . 12
Noise and vibration . . . . . . . . . . . . . . . . 13
Technical specifications . . . . . . . . . . . . 14
Overview . . . . . . . . . . . . . . . . . . . . . . . . 15
Instructions for use . . . . . . . . . . . . . . . . 16
Maintenance and care . . . . . . . . . . . . . . 19
Disposal information . . . . . . . . . . . . . . . 19
-conformity . . . . . . . . . . . . . . . . . . . . 20
Exemption from liability . . . . . . . . . . . . . 20

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result in
slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the appliance

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 19)!
12

For your safety

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" for
-
handling electric power tools in the
enclosed booklet ( document no.:
(315.915),
the currently valid site rules and the
-
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

The orbital sander is designed
- for commercial use in industry and trade,
- for use with suitable tools recommended
by the manufacturer for this power tool.
The FLEX orbital sander can be used with
Velcro-backed sandpaper (102 mm x 115 mm)
or normal sheets of sandpaper
(115 mm x 140 mm). This sander is suitable
for coarse, medium or fine sanding of wood,
plaster, metal an plastics. It is ideal for
leveling wallboard joints, finishing cabinets,
fitting screens and soors an for general
finishing work in the shop.
This orbital sander is also the ideal tool for
sanding flat the joints between gypsum
plasterboard as well as for fine sanding
cabinets, precision installation of mosquito
net windows and doors and general sanding
work in the workshop
MS713