Introduction - hager S145-22X Manual De Instalación

Summary
1. Introduction ................................................67
2. Preparation .................................................69
2.1 Opening the detector.............................69
2.2 Power supply .........................................69
3. Programming..............................................70
4. Configuration..............................................71
5. Installation precautions.............................72
6. Installation...................................................73
6.1 Testing the radio link ..............................73
6.2 Fixing......................................................73
7. Configuration and adjustments
of detection.................................................74
7.1 Range of detection ................................74
7.2 Horizontal adjustment
of the detection angle ............................76
7.3 Adjustment of the sensitivity .................77
7.4 Adjustment of the operational options..77
8. operating test.............................................78
8.1 Detection zone test................................78
8.2 Real test .................................................78
9. Maintenance ...............................................78
9.1 Fault indication.......................................78
9.2 Changing the battery .............................78
9.3 Maintenance ......................................... 79
10. Technical data ..........................................79
Recommendations
When the product is opened its internal
components may be damaged by
electrostatic discharge.
The following precautions must therefore be
taken during maintenance or repair
operations:
• do not touch the electronic components
or metal parts of their connections either
directly or with ametal tool,
• use non-magnetic tools,
• discharge any static electricity in your
clothes by touching a bare metallic surface
such as a water pipe or earthed electrical
devices before accessing the internal
components,
• avoid moving around when accessing the
internal components several times during
the same operation, to avoid electrostatic
charge build-up. Otherwise, apply the
precautions above every time you nee to
access the components.
67

1. Introduction

The 2 x 12 m external motion detector has
been specially designed to detect intruders
before they have a chance to break in by
monitoring the area outside the protected
site.
Because both detection systems operate on
either side of the detector and detection can
be adjusted to provide narrow 4 to 24 m
protection (2 x 12 m on each side), this is the
ideal product for protecting a façade.
Its immunity to false alarms caused by
sunlight or car headlights is backed up by its
highly reliable pet-tolerant detection system
(both detection beams have to be broken in
order to trigger a prealarm or alarm). Its
performance is further enhanced by a
temperature compensation system that
automatically adjusts and increases
detection sensitivity when the outside
temperature comes close to that of a human
being (35°C - 37°C).
GB