Honda HP500H Manual De Explicaciones página 54

Hoisting procedure
1)Lower the entire load.
2)Make sure the engine switch and fuel valve are OFF.
3)Set the drive clutch levers in their lowered position and fix them in
place with vinyl tape or other means.
CAUTION:
If the drive clutch levers are not fixed in place, deformation may occur
at the rope contact points.
4)Tie the hoisting rope to the base of the handle grips.
5)Tie the rope to the front of the carrier bracket.
6)Check the stability of the unit while hoisting.
HOISTING ROPE
DRIVE CLUTCH LEVERS
51