Honda HP500H Manual De Explicaciones página 47

Adjusting the side clutch cable
Steering control will be impaired unless both side clutch cables are
adjusted properly.
1.With the engine off, rock the power carrier forward and backward to
find the position at which each lever can be pulled closest to the
handle grip.
2.With each steering clutch lever fully gripped, check whether the
clearance between the projection on the lever and the handle grip is:
30.0–35.0 mm (1.18–1.38 in)
3.To adjust, loosen the lock nut with the lever gripped and turn the
adjust nut to get the prescribed clearance.
4.After the adjustment, tighten the lock nut.
30.0–35.0 mm
(1.18–1.38 in)
STEERING CLUTCH
LEVER
44
HANDLE GRIP
LOCK NUT
ADJUST BOLT