Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Know Your Pressure Washer
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Choke
Control
Throttle
Control
Fuel Valve
Air Filter
Lever
Multi-Reg
Wand
High
Pressure
Pump
PRESSURE WASHER
High Pressure Pump (located
inside the shroud): Increases the
pressure of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and wand.
Spray Gun: Connects with wand to
control water flow rate, direction, and
pressure.
Multi-Reg Wand: Has a spray nozzle
which adjust from a pencil stream (0°)
to a wide angle fan spray (40°). The
spray can be adjusted by twisting the
nozzle clockwise and/or
counterclockwise. Also, the high and
low pressure settings can be con-
trolled by moving the nozzle in and
out. See Operation section.
D25852
OPERATION
Chemical
Hose
Spray
Gun
Hand
Grip
Chemical Hose: Allows cleaners or
cleaning solvents to be mixed with
the pressurized water stream. See
How To Siphon Chemicals/Cleaning
Solvents in Operation section of this
manual.
ENGINE
Choke Control: Opens and closes
the choke valve in carburetor.
Throttle Control Lever: Controls
engine speed.
Starter Grip: Pulling starter grip
operates recoil starter to crank
engine.
Fuel Valve Lever: Opens and closes
connection between fuel tank and
carburetor.
10- ENG
High
Pressure
Hose
Engine
Capítulos
Tabla de contenido
