Vox Function - Midland G9 Manual De Uso

is always 10 mW (ERP).
• PMR446 channels: The selection of high or low power influences the
use of the PTT key. If you choose "H" (high power), by pressing the
PTT key, regardless of what part of it, the transceiver transmit with
high power. If you choose "L" (low power), by pressing the big PTT, the
transceiver will transmit with low power; while by pressing the small
PTT it will transmit with high power.
• LPD channels: the high/low output power selection is not available
on LPD channels; so the two PTT transmit always with high power
(note for G9 Plus Dualband version).
WARNING: to optimize the battery consumption, it is necessary to set the
Output power of the menu as "L-low". In this way, pressing the Boost PTT,
you send with high power only when you really need. As by default the
Output power is "H-high"; so it is really recommended to change this pa-
rameter to "L-low".

VOX function

Midland G9 Plus enables hands free conversations through the VOX fun-
ction: just speak in the direction of the microphone and the communica-
tion will be automatically activated.
The VOX sensitivity can be adjusted in 3 different levels.
You can enable the VOX function with or without accessories.
The fourth level activated is the Vox TalkBack: if one radio is continuously
transmitting in VOX, the Vox TB will automatically stop the transmission
after 20 seconds to allow the transmission to the other users as well.
To activate the VOX function press the MENU button till VOX appears on
the display.
Use ▲▼ to select the sensitivity levels:
• Of: Off;
• 1: High
• 2: Middle
• 3: Low
• 4: Talk Back (with high sensitivity)
To confirm your selection, press PTT or wait for 5 seconds.
To disable the VOX function, follow the procedure here above indicated
and select oF.
Midland G9/G9E Plus instruction guide | 17