Wiring The Light Fixture - Heath Zenith DualBrite 4558 Manual De Instrucciones

WIRING THE LIGHT FIXTURE

Note: All wiring must be run in accordance with the Na-
tional Electrical Code through conduit or another accept-
able means. Contact a qualified electrician if there is any
question as to the suitability of the system.
Connect the fixture wires to the wires in the junction box.
Twist the wires together and secure with wire connectors.
1. Route the junction box ground wire through the large
hole next to the ground screw (GND). Attach the
ground wire under the ground screw.
2. Using the wire connectors:
• Connect all white wires together.
• Connect all black wires together.
Y
V I T
I T I
–
N S
S E
+
S E
+
Ground Screw
209987-01
White to white
Black to black
IT Y
IT IV
N S –
Black
Green
or Bare
Copper
White
One motion sensing light
White
Black
Green
or Bare
Copper
Two motion sensing lights (working independently)
3
Light
Fixture
Light Light
Fixture Fixture