Mounting Flat Panel Display - peerless-AV SA771PU Manual De Instrucciones

• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the display.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15 mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.

Mounting Flat Panel Display

For Dedicated PLP Plate (not evaluated by UL):
5
Refer to PLP model instruction sheet for attachment
of dedicated PLP plate to display.
Install two M10 x 15 mm screws (provided with
dedicated PLP plate) into top two holes of dedicated
PLP plate leaving 1/4" of exposed thread as shown
in fi gure 5.1.
DEDICATED
PLP PLATE
ADAPTER PLATE
fi g. 5.1
5-1
Insert two M10 x 15 mm screws (E) into bottom holes of adapter plate as shown in fi gure 5.3 or 5.4. Tighten all
fasteners with 6 mm allen wrench (H).
DEDICATED PLP PLATE
ADAPTER PLATE
fi g. 5.3
WARNING
1/4"
M10 X 15 MM
SCREW
A
E
14 of 70
For Universal Adapter Bracket: Hook M10 x 15 mm
screws into keyslots of wall arm adapter plate (A) as
shown fi gure 5.2.
DISPLAY NOT SHOWN
FOR CLARITY
ADAPTER PLATE
ADAPTER
PLATE
fi g. 5.4
ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12
B
1/4"
fi g. 5.2
B
E
A