Tabla de contenido
Idiomas disponibles
Idiomas disponibles
10
Installation
2 Installation
2.1 Unpacking and Inspection
Check the contents and inspect the supply immediately upon delivery. If the shipping
container is damaged upon arrival, check the contents for damage and, if necessary,
submit a damage claim to the transport agency. If the container is not damaged, remove
the device from the protective packaging; note how it was packaged and check all
components for damage.
If the device must be shipping again, the original packaging should be reused. The
device must be correctly packed to ensure safe transportation. Unplug all cables before
transporting.
2.2 Selecting the Location
For accurate weighing results, care must be taken to select the optimal location for the
scale!
•
Place the scale on a stable surface which is free of vibrations and as horizontal as
possible.
•
Avoid excessively fluctuating temperatures and direct sunlight. Ensure correct
environment conditions.
•
Avoid drafts (for example, from fans or air conditioner).
•
Never use a hammer to close paint cans on the weighing platter.
NOTE:
Condensation from humidity can form on the surfaces of a cold device when it is
brought into a substantially warmer area.
Disconnect the device from power and allow it to acclimatize for approximately 2 hours
before reconnecting it to the power.
2.3 Scale Configurations
RPA455x and RPA455xx support standard, wall-mount, and base-only configurations
to meet different installation requirements in customer site. For dimensions of each
configuration, please go to Dimensions.
Standard Configuration
30542729
|
A
|
10/2019
Wall-mount Configuration
METTLER TOLEDO Installation Manual RPA455x / RPA455xx
Base-only Configuration
Tabla de contenido
