Main Functions - CAPITAL SPORTS Orbit Pro Manual De Instrucciones

EN
30
How to Install the Battery
1 Remove the battery cover at the rear of computer.
2 Place two „SIZE-AA" battery into the battery housing.
3 Insure battery is correctly positioned and battery spring is proper contact
with battery.
4 Re-install the battery cover.
5 If the display is illegible or only partial segment appear, remove battery
and wait 15 seconds before reinstalling.

MAIN FUNCTIONS

MODE:
This key lets you to select and lock on to a particular function you want.
SET:
Can to proceed the data establish for TIME, DISTANCE, CALORIES, PULSE.
CLEAR(RESET):
The key to reset the value to zero by pressing the key.
ON/OFF(START/STOP):
The key to pause the signal input by pressing the key.
Notes on Main Functions:
AUTO ON/OFF
• The system turns on when any key is pressed or when it sensor an input
from the speed sensor.
• The system turns off automatically when the speed has no signal input or
no key are pressed for approximately 4 minutes.
RESET
The unit can be reset by either changing battery or pressing the MODE key for
3 seconds.
MODE
To choose the SCAN or LOCK if you do not want the scan mode, press the
MODE key when the pointer on the function you want which begins blinking.